Products Search
-Used to prevent cross-contamination by opening both doors at the same time
-When AC220V power is supplied, power is supplied to each component with DC12V through SMPS.
-Normally, each LOCK device is turned off to keep the door open, and when one door is opened, it is locked by supplying power to the LOCK device of another interlocked door.
-It is possible to check the motor current and the cause of the failure through the display window.
-Overheating, overcurrent, undercurrent (idle and motor abnormality), restraint protection function
-Built-in switching power supply
- It can control upto 32 FFU controls.
(can be controlled upto maximum 1024 by using 32 MCULs)
- Individual/group FFU control
- Address can be designated upto 16 groups.
- It is suitable for control and monitoring system of
small-scale and middle-scale .
-Built-in digital motor protection function
-It is possible to check the motor current and the cause of the failure through the display window.
-Various protection elements (overheating, overcurrent, undercurrent, restraint protection)
-Fuse disconnection detection function: Motor stops automatically.
-TRIP cause check function: Trip cause and current can be checked.
-Sequential start function.
-3-phase AC 2 Motor control function, FFU and 1:2 installation.
-Built-in digital motor protection relay function.
-Ground fault (video) current monitoring function with built-in ZCT.
-Overheating, overcurrent, undercurrent (idle and motor abnormality), restraint protection function.
-Fuse disconnection detection function: Motor stops automatically.
-TRIP cause check function: Trip cause and current can be checked.
Digital temperature PT100 controller
(4 relay outputs)